Conduit Adaptor
- Wiring Ducts
- Cable Markers
- Wrapping Bands
- Cable Clamps
- Cable Glands
- Conduits
- Bushings
- Wire Connectors
- Caps
- Tubes
- Cable Clips
- PCB Parts
- Fasteners
- Plastic Screws
- Communication Connectors
- Value Pack
- Terminal & Tool
- Shielded Cable Wire clamp
- Wiring Terminals
- Cable clamp
-
Cable Lugs And Connectors
- Copper aluminum Inserting pin terminal
-
Copper nose Wiring Terminals
- SG- Copper Nose Terminal
- OTD- European style copper terminal
- Square head no holes straight plate copper nose
- DTDK short copper wiring nose
- AWG type copper tube terminal
- DT Small head Copper terminal
- DT- Diplopore Copper terminal
- DT- Copper terminal
- JG-Cold Press Wiring Terminals
- SC-Cold Press Wiring Terminals
- OT- Copper open mouth wiring terminal
-
Copper aluminum transition terminal
- CPTAU- Copper Aluminum Nose Terminal
- DTLS- Double holes copper-aluminum terminals
- OTLD copper-aluminum wiring nose
- DLT- Aluminium-copper terminals
- DTL- copper-aluminum terminals
- DTL- Small head copper-aluminum terminals
- DTL- Circular Copper and Aluminium Terminals
- DTL- Square head copper aluminum terminal
- BLMT Bolt-Type Torque Terminal
- AMB bolt-type continuation pipe
- DTA- Copper Insert pin for Electricity Meter
- Double-hole brazed terminal
- Cold-pressed butt pipe
- DL- Aluminum terminal
- DTF- Square head copper terminal
- Guideway
PBG
Material: Zinc alloy.
Features: Waterproof, corrosion-resistant, and excellent heat resistance.
Usage: First, insert the tightening head and clamping ring into the outer end of the hose, then screw the clamping claw into the inner side of the hose, and finally combine it with the body to tighten it.
Purpose: Pipe joint, with one end paired with a metal hose and the other end paired with a PVC pipe.
EBG
Material: Zinc alloy.
Features: Waterproof, corrosion-resistant, and excellent heat resistance.
Usage: First, insert the tightening head and clamping ring into the outer end of the hose, then screw the clamping claw into the inner side of the hose, and finally combine it with the body to tighten it.
Usage: Pipe joint, one end is matched with a metal hose, and the other end is matched with an EMT pipe.
BGQ
Material: UL qualified NYLON66, fire rating 94V-2.
Color: Black.
Features: Integrated design, easy and quick installation.
Usage: First, insert the wave tube into the clamping claw, and then pull out the tightening head to the left or right to complete.
FAB
Material: UL qualified ABS, fire rating 94HB.
Color: Grey.
Usage: Insert one end into the wave tube and the other end into the junction box for box connection.
Features: Convenient connection and time-saving.
FAM
Material: UL qualified ABS, fire rating 94HB.
Color: Grey.
Usage: Insert wave tubes at both ends as extensions.
Features: Convenient connection and time-saving.
BG
Material: UL qualified NYLON 66, fire rating 94V-2.
Color: Grey.
Usage:
1. First, insert the body into the iron plate, and then fix it with a nut.
2. Insert the wave tube into the wave tube claw, and then use the tightening head to rotate in the forward direction for tightening.
Usage: Distribution board, used for fixing electrical pipes and waterproofing in machinery.
BM
Material: UL qualified NYLON 66, fire rating 94V-2, clamping ring made of thermoplastic elastomer (TPE), gasket made of PVC.
Color: Black.
Usage:
1. First, insert the body into the iron plate, and then fix it with a nut.
2. Insert the wave tube into the clamping ring, and then use the tightening head to rotate in the forward direction for tightening.
Usage: Distribution board, used for fixing and waterproofing wave pipes in machinery.
RBG
Material: Zinc alloy.
Features: Waterproof, corrosion-resistant, and excellent heat resistance.
Usage: First, insert the tightening head and clamping ring into the outer end of the hose, then screw the clamping claw into the inner side of the hose, and finally combine it with the body to tighten it.
Usage: L-shaped box connector, one end is equipped with a metal hose, and the other end is used with a wiring box.
FBG
Material: Zinc alloy.
Features: Waterproof, corrosion-resistant, and excellent heat resistance.
Usage: First, insert the tightening head and clamping ring into the outer end of the hose, then screw the clamping claw into the inner side of the hose, and finally combine it with the body to tighten it.
Usage: Internal tooth type tube connector, one end is matched with a metal hose, and the other end is internal tooth type (PT tooth), matched with an external tooth tube.
NBG
Material: Zinc alloy.
Features: Waterproof, corrosion-resistant, and excellent heat resistance.
Usage: First, insert the tightening head and clamping ring into the outer end of the hose, then screw the clamping claw into the inner side of the hose, and finally combine it with the body to tighten it.
Usage: One end is used with a metal hose, and the other end is used with a wiring box.
MG
Material: ABS.
Color: Grey.
Usage:
1. First, insert the body into the iron plate, and then fix it with a nut.
2. Combine them in the order shown in the diagram.
If ordering each part separately, please add the code after the model: nut (L), body (B), clamping ring (S), tightening head (N), clamping claw (C).
PAQ
Material: UL qualified NYLON66, fire rating 94V-2.
Color: Black.
Features: Integrated design, easy and quick installation.
Usage: First, insert the wave tube into the clamping claw, and then pull out the tightening head to the left or right to complete.
FAP
Material: UL qualified ABS, fire rating 94HB.
Color: Grey.
Usage: Insert one end into a wave tube and the other end into a PVC tube as an extension.
Features: Convenient connection and time-saving.