PCB support

Products Categories

Wiring Ducts
Cable Markers
- Pre-assembled
- After assembled
- Others
Wrapping Bands
Cable Clamps
Cable Glands
- Cable Gland
- Strain Relief Cable Gland
- Conduit Adaptor
- Accessories
Conduits
- PE conduit
- PA conduit
- PP conduit
- PVC conduit
- Metal conduit
Bushings
- Bushing/Cover/Grommet
- Strain Relief Bushing
- Plug
- Bushing Assembly Tool
Wire Connectors
- Crimping Tool
- Wire Connector/Nut
Caps
Tubes
- Tube/Sleeve/Hot melt tube
- Heat-Shrinkable Tube
- Heat-Shrinkable Tube with glue
Cable Clips
- Cable Clip
- Flat Cable Clip
- Others
PCB Parts
- PCB support
- Rivet
- Others
Fasteners
Plastic Screws
Communication Connectors
Value Pack
Terminal & Tool
- Terminal
- Insulated Terminal
- Cable Lug
- Cable Lug-High Voltage
- Male/Female Lug
- Cord End Terminal
- Crimping Tool/Wire Stripper/Cutter
Shielded Cable Wire clamp
Wiring Terminals
- Fuse Wiring Terminals
Cable clamp
- Aluminum special-shaped wiring clamp
- SSY aluminum Device Cable clamp
- SYT copper equipment wire clamps
- Brazed copper-aluminum transition wire clamps
- Brass bolt clamps
- C-type copper wire clamp
Cable Lugs And Connectors
- Copper aluminum Inserting pin terminal
- Copper nose Wiring Terminals
- Copper aluminum transition terminal
- BLMT Bolt-Type Torque Terminal
- AMB bolt-type continuation pipe
- DTA- Copper Insert pin for Electricity Meter
- Double-hole brazed terminal
- Cold-pressed butt pipe
- DL- Aluminum terminal
- DTF- Square head copper terminal
Guideway
- Imitation imported steel (aluminum) guide rail
- Rail cutter
- Distribution box guide rail
- Guide rail accessories
- GB series steel din-rail
- Ordinary steel (aluminum) guide rail

Cable shielding grounding terminal

Double-layer metal cable clamp

Anti electromagnetic grounding wire clamp

Grounding shielding clamp cable clamp

Copper nose connector Cable Clamp

PG aluminum special-shaped wire clamps

Copper-aluminum transition special-shaped wire clamps

CSA

Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: No need to fix the PC board of the chassis machine.
Usage: First drill a hole in the substrate, then fix it from the bottom with # 6 screws, and then insert the PC board into it.
Features: The PC board with a strong hook design will not shake and the bottom will not protrude.

Product Description

product detail

Dimensional Drawing

Product Parameters

Item No.

PCB

Chassis

hole M1

thickness T1

hole M2

thickness T2

LCA-14

13.6

2.5

2.0

3.0

1.7

Shielding clip wireframe