Products
- Wiring Ducts
- Cable Markers
- Wrapping Bands
- Cable Clamps
- Cable Glands
- Conduits
- Bushings
- Wire Connectors
- Caps
- Tubes
- Cable Clips
- PCB Parts
- Fasteners
- Plastic Screws
- Communication Connectors
- Value Pack
- Terminal & Tool
- Shielded Cable Wire clamp
- Wiring Terminals
- Cable clamp
-
Cable Lugs And Connectors
- Copper aluminum Inserting pin terminal
-
Copper nose Wiring Terminals
- SG- Copper Nose Terminal
- OTD- European style copper terminal
- Square head no holes straight plate copper nose
- DTDK short copper wiring nose
- AWG type copper tube terminal
- DT Small head Copper terminal
- DT- Diplopore Copper terminal
- DT- Copper terminal
- JG-Cold Press Wiring Terminals
- SC-Cold Press Wiring Terminals
- OT- Copper open mouth wiring terminal
-
Copper aluminum transition terminal
- CPTAU- Copper Aluminum Nose Terminal
- DTLS- Double holes copper-aluminum terminals
- OTLD copper-aluminum wiring nose
- DLT- Aluminium-copper terminals
- DTL- copper-aluminum terminals
- DTL- Small head copper-aluminum terminals
- DTL- Circular Copper and Aluminium Terminals
- DTL- Square head copper aluminum terminal
- BLMT Bolt-Type Torque Terminal
- AMB bolt-type continuation pipe
- DTA- Copper Insert pin for Electricity Meter
- Double-hole brazed terminal
- Cold-pressed butt pipe
- DL- Aluminum terminal
- DTF- Square head copper terminal
- Guideway
SPS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: For fixing PC boards.
Usage: One end is fixed on the PC board, and the other end is fixed with screws.
KCS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-0.
Purpose: For fixing PC boards.
Usage: Tool free, easy to load and unload by hand. When using, first drill holes in the substrate, fix the isolation column, and then insert the PC board.
HTN
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
No internal thread
HTP
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Usage: Use screws and nuts to isolate the base plate from the machine board.
MMR
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2, base backing adhesive.
Purpose: Used for fixing between machine boards and PC boards that cannot be drilled.
MS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2, base backing adhesive.
Purpose: Used for fixing between machine boards and PC boards that cannot be drilled.
TMS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: Used for fixing between machine boards and PC boards that cannot be drilled.
HMS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: Used for fixing between machine boards and PC boards that cannot be drilled.
ES
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: Fixed PC board, easy to disassemble.
SCS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Usage: One end is fixed on the PC board, and the other end needs to be matched with a nut or tapping.
BCS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Usage: One end is fixed to the PC board, and the other end can be fixed to the wooden board.
RS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Usage: First drill a hole in the substrate, then push the isolation column upwards from the bottom to fix it, and then fix the PC board.
Features: No tools are required to fix the PC board, and it is easy to disassemble when replacing or repairing the PC board.
RLS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: To support PC boards and increase their stability.
Usage: First drill a hole in the substrate, then push the isolation column upwards from the bottom to fix it, and then place the PC board on top.
DS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: For fixing PC boards.
Usage: Tool free, easy to load and unload by hand. When using, first drill holes in the substrate, fix the isolation column, and then insert the PC board.