Products

RYO-38
Applicable bare terminal: 14-38sq/6-2 AWG/16-35 mm ²
RYO-100
Suitable for bare terminals: 22-100sq/4 AWG-4/0/25-120 mm ²
RYO-150
Applicable bare terminals: 8-150sq/8 AWG-250~300 MCM/10-150mm ²

1. The newly innovated 5 sections design allows you to adjust the tightness you desire.
2. In any case, the head part happens to loosen after using for some time, simply tighten by turning the adjustment button clockwise to reduce the jaw’s tolerance.
3. To improve the lifetime of the tool, all rivets used are specially designed and had undergo heat treatment.
4. The saw-tooth sections are polished to avoid any burr after extruding.
5. The newly innovated version comes with cushioned handles and a ratchet structure that requires less force.
For terminals: JIS 0.5, 1.25, 2, 3.5 / DIN 0.5, 1.5, 2.5, 4

For Flag Female Disconnects: 1.25-2sq / 0.5-2.5m㎡
For Insulated Terminals: 2sq / 1.5-2.5m㎡

1. The newly innovated 5 sections design allows you to adjust the tightness you desire.
2. In any case, the head part happens to loosen after using for some time, simply tighten by turning the adjustment button clockwise to reduce the jaw’s tolerance.
3. To improve the lifetime of the tool, all rivets used are specially designed and had undergo heat treatment.
4. The newly innovated version comes with cushioned handles and a ratchet structure that requires less force.
For terminals: JIS 1.25, 2, 5.5 / DIN 1.5, 2.5, 6

For Modular Connector: 8P2C / 8P4C / 8P6C / 8P8C / 6P2C / 6P4C /6P6C

For Wire Size: 0.5-8.0m㎡
Instruction:
1.Place wire between blades and close handles to trim wire.
2.Adjust knob to change tension of blade on wire according to insulation thickness.
3.Scale Length to be stripped, Close Handle completely to remove nsulation.