Products
- Wiring Ducts
- Cable Markers
- Wrapping Bands
- Cable Clamps
- Cable Glands
- Conduits
- Bushings
- Wire Connectors
- Caps
- Tubes
- Cable Clips
- PCB Parts
- Fasteners
- Plastic Screws
- Communication Connectors
- Value Pack
- Terminal & Tool
- Shielded Cable Wire clamp
- Wiring Terminals
- Cable clamp
-
Cable Lugs And Connectors
- Copper aluminum Inserting pin terminal
-
Copper nose Wiring Terminals
- SG- Copper Nose Terminal
- OTD- European style copper terminal
- Square head no holes straight plate copper nose
- DTDK short copper wiring nose
- AWG type copper tube terminal
- DT Small head Copper terminal
- DT- Diplopore Copper terminal
- DT- Copper terminal
- JG-Cold Press Wiring Terminals
- SC-Cold Press Wiring Terminals
- OT- Copper open mouth wiring terminal
-
Copper aluminum transition terminal
- CPTAU- Copper Aluminum Nose Terminal
- DTLS- Double holes copper-aluminum terminals
- OTLD copper-aluminum wiring nose
- DLT- Aluminium-copper terminals
- DTL- copper-aluminum terminals
- DTL- Small head copper-aluminum terminals
- DTL- Circular Copper and Aluminium Terminals
- DTL- Square head copper aluminum terminal
- BLMT Bolt-Type Torque Terminal
- AMB bolt-type continuation pipe
- DTA- Copper Insert pin for Electricity Meter
- Double-hole brazed terminal
- Cold-pressed butt pipe
- DL- Aluminum terminal
- DTF- Square head copper terminal
- Guideway
PN-HN
Material: UL94V-2 flame rated, UL approved Nylon 66.
For better insulation, light weight, no rust.
Used extensively as metal screw but where insulation is needed. Good for computer or electronics equipment fixation
PN-N
Material: UL94V-2 flame rated, UL approved Nylon 66.
For better insulation, light weight, no rust.
Used extensively as metal screw but where insulation is needed. Good for computer or electronics equipment fixation
PF-N
For better insulation, light weight, no rust.
Used extensively as metal screw but where insulation is needed. Good for computer or electronics equipment fixation.
Phillips pan head.
SWS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: For fixing PC boards.
Usage: Tool free, easy to load and unload by hand. When using, first drill holes in the substrate, fix the isolation column, and then insert the PC board.
HTS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Usage: Use screws and nuts to isolate the substrate from the machine board.
Characteristic: Can be extended when the length is insufficient.
MS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: Fixed PC board, easy to disassemble.
Usage: First drill the bottom hole of the substrate as shown in the figure, insert the isolation column through the large hole, and then push it into the small hole to fix it.
BMS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: Used for fixing between machine boards and PC boards that cannot be drilled.
PS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: To support PC boards and increase their stability.
Usage: First drill a 4.8mm hole in the substrate, then insert the isolation top pillar into the substrate hole.
CSA
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: No need to fix the PC board of the chassis machine.
Usage: First drill a hole in the substrate, then fix it from the bottom with # 6 screws, and then insert the PC board into it.
Features: The PC board with a strong hook design will not shake and the bottom will not protrude.
CS
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: No need to fix the PC board of the chassis machine.
Usage: First drill a hole in the substrate, then fix it from the bottom with # 6 screws, and then insert the PC board into it.
Features: The PC board with a strong hook design will not shake and the bottom will not protrude.
LCA
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: For fixing PC boards.
Usage: Tool free, easy to load and unload by hand. When using, first drill holes in the substrate, fix the isolation column, and then insert the PC board.
SPA, SPB, SPC, SPD
Material: UL qualified NYLON 66 (natural color), fire rating 94V-2.
Purpose: For fixing PC boards.
Usage: Tool free, easy to load and unload by hand. When using, first drill holes in the substrate, fix the isolation column, and then insert the PC board.
SN
Material: UL94V-2 flame rated, UL approved Nylon 66.
Color: Natural.
Function: To join chassis board and PC board.
NF/ NFT
Material: PE.
Color: White.
characteristic:
1. High elasticity and impact resistance.
2. Steel nails can be directly attached to plastic seats, which can save a lot of time and reduce construction costs.